Reply To: 3D Printer Filament Extruder for under $100?

Home Forums General 3D Printer Filament Extruder for under $100? Reply To: 3D Printer Filament Extruder for under $100?

#1264

Paul
Keymaster

@abrownlizard: PaxSpace is a makerspace that is located in St Mary’s County, Maryland.

For this extruder, our makerspace has one delta printer with the possibility of getting more in the future. The most expensive part about 3D printing is definitely the spools of plastic. So I was just looking for any other interest from PaxSpace’s membership OR outside interest in building something to reuse the plastic from test prints so that members can use our 3D printer without worry about the materials involved.

Right now I’m more interested in gathering ideas and other persons of interest. If I get enough people (only need 2 or 3 members total) that are willing to put time and effort into building one for PaxSpace, then we’d probably move forward and try to build one.

Sponsors

Calendar

<< Feb 2017 >>
SMTWTFS
29 30 31 1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 1 2 3 4

Twitter Feed