OS X and PrintrBot Simple Workflow

Home Forums Get Help OS X and PrintrBot Simple Workflow

This topic contains 3 replies, has 3 voices, and was last updated by  Nicholas Clark 3 years, 2 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #1805

    Michael Parks
    Participant

    http://wiki.paxspace.org/index.php?title=Mike_Parks

    Thanks to Paul and Nick for getting me squared away on using the PrintrBot Simple. I got home and jotted down everything I learned this weekend. Instead of keeping it on my own computer I threw it up on the wiki in case anyone else needs help getting started with the PrintrBot Simple.

    • This topic was modified 3 years, 2 months ago by  Michael Parks.
    #1808

    Paul
    Keymaster

    thanks for taking the time to record the steps. This definitely will be very useful when we start holding classes specifically for the pb simple and more 3d printing courses!

    #1809

    Paul
    Keymaster

    also, if you’re looking for a good alternative to iDraw, try out inkscape. Its what I use for SVG creation and feel it has a lot of tools that are really good in that respect (just missing centerline tracing…). Not to mention its also opensource and free :)

    #1813

    Nicholas Clark
    Keymaster

    this is great. thanks Mike!

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

Sponsors

Calendar

<< Aug 2017 >>
SMTWTFS
30 31 1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30 31 1 2

Twitter Feed