PaxSpace Latenight

Home Forums General Event Logs PaxSpace Latenight

This topic contains 2 replies, has 1 voice, and was last updated by  Paul 2 years, 10 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1779

    Paul
    Keymaster

    Who’s coming?
    Anyone working on something interesting?
    Anyone want/need help with something?

    Let everyone know here and stop on by for some interesting discussions and working being done at PaxSpace Latenight!

    #1780

    Paul
    Keymaster

    I will be there tonight, looking forward to tinkering with the SVG -> GCODE toolchain for the CNC router.

    #1802

    Paul
    Keymaster

    I was there until 2am :)

    Did work on the toolchain. Got some simple .stl files from blender into pycam and through the toolchain to gcode. Didn’t run the gcode but it looked like it was going to work okay.

    Might take a look at trying out MeshCam… Its $250 for a license but we’d be able to have a dedicated CAM machine and apparently it is much simpler than anything else that is currently available.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Sponsors

Calendar

<< May 2017 >>
SMTWTFS
30 1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31 1 2 3

Twitter Feed