Rostock Max 3D Printer

Home Forums Projects Rostock Max 3D Printer

This topic contains 1 reply, has 2 voices, and was last updated by  Paul 3 years, 3 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #685

    Micah
    Participant

    If you were at the open house, you probably know that my 3D printer wasn’t quite fully functional yet. I tried adding some capacitors to the power supply to help with the transient current load, but they actually caused the power supply to shut down immediately (maybe they were too big?). Anyway, I bought a dedicated 12V 30A power supply. I got it hooked up last night and everything seems to be working ok. I got all the calibrations completed and should be doing the first print tonight!

    #686

    Paul
    Keymaster

    Very exciting! Let us know how it goes!

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Sponsors

Calendar

<< Feb 2017 >>
SMTWTFS
29 30 31 1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 1 2 3 4

Twitter Feed